TRSE09 7PK 38810R60W01 12V Auto AC Compressor For Honda For Accord
2.0 WXHD053
Parameter:
| Model Number |
WXHD053
|
| Car Model |
For Honda For Accord 2.0
|
| Compressor model | TRSE09 7PK
|
| Voltage |
12V
|
| OE No. |
38810R60W01
|
Compressor Pictures
Here’s a detailed guide on the daily maintenance of a car air
conditioning compressor
1. Regularly Run the AC System
Why: Running the AC system regularly, even in colder months, helps
keep the compressor and other components lubricated. This prevents
seals from drying out and refrigerant from leaking.
How: Turn on the AC for at least 10-15 minutes once a week, regardless
of the season.
2. Check Refrigerant Levels
Why: Low refrigerant levels can cause the compressor to work harder,
leading to overheating and premature failure.
How: Have a professional check the refrigerant levels during routine
maintenance. Avoid overfilling, as it can also damage the system.
3. Inspect for Leaks
Why: Refrigerant leaks can reduce cooling efficiency and strain the
compressor.
How: Look for oily residue or stains around AC components, which may
indicate a leak. If you suspect a leak, have it repaired
immediately.
4. Clean the Condenser
Why: The condenser, located in front of the radiator, can accumulate
dirt, debris, and bugs, reducing its ability to dissipate heat.
This can cause the compressor to overwork.
How: Regularly clean the condenser with water or compressed air,
especially after driving in dusty or muddy conditions.
5. Replace the Cabin Air Filter
Why: A clogged cabin air filter restricts airflow, forcing the AC
system to work harder and increasing the load on the compressor.
How: Replace the cabin air filter as recommended by your vehicle’s
manufacturer (usually every 12,000 to 15,000 miles).
6. Listen for Unusual Noises
Why: Strange noises (e.g., grinding, squealing, or clunking) when the
AC is running may indicate a problem with the compressor or its
clutch.
How: If you hear unusual sounds, have the system inspected by a
professional.
7. Check the Compressor Belt
Why: A worn or loose drive belt can cause the compressor to
malfunction or fail.
How: Inspect the belt for cracks, fraying, or looseness. Replace it if
necessary, and ensure proper tension.
8. Monitor AC Performance
Why: Weak cooling, inconsistent temperatures, or warm air blowing from
the vents may indicate a problem with the compressor or other AC
components.
How: If you notice a decline in performance, have the system checked
by a technician.
9. Avoid Overuse on High Settings
Why: Running the AC on maximum settings for extended periods can
strain the compressor.
How: Use moderate settings and allow the system to cycle normally.
10. Schedule Professional Maintenance
Why: Regular professional inspections can identify and address
potential issues before they become major problems.
How: Have your AC system inspected annually by a qualified technician.
This includes checking refrigerant levels, testing pressure, and
inspecting components for wear or damage.
