Car AC Compressor Parts For BMW3/X3/Z4 64529158038 3R41145010
WXBM016
Parameter :
| Model Number |
WXBM016
|
| Car Model |
For BMW3/X3/Z4
|
| Type |
CSV613 4PK
|
| Year Model |
2001-2008
|
| OE No. |
64529158038/3R41145010/64509182800/3R41045010/3R41245010/3R41445010
|
WNRLN Packing
ß ß ßWNRLN packaging and shock-proof foams, which have protective
functions.
Their thickness is thicker than ordinary box and foam , Relatively
speaking, the quality of WNRLN packaging is better than that of
ordinary packaging.
ß ß ß It has the advantages of good stiffness and high wear resistance.
It is deeply loved by domestic and foreign customers.
Compressor failure status
In the case of leaks, refrigerant can escape the system through
various points such as the shaft seal, hoses, O-rings, and gaskets.
These leaks can be difficult to identify and may require the use of
UV dye or electronic leak detectors. When refrigerant leaks, it not
only affects the compressor but can also damage other components in
the system. The refrigerant carries an oil mist that helps keep
everything lubricated, so insufficient refrigerant can disrupt the
air conditioning cycle and cause damage.
Odd noises coming from the compressor can be a result of internal
parts failing or seizing. This can lead to unpleasant sounds,
especially from the compressor clutch or belt pulley.
If the air conditioner is not producing cool air, it's likely due
to a lack of refrigerant or a failing component in the system.
Insufficient refrigerant prevents the compressor from circulating
enough refrigerant to maintain proper cooling.
If the check engine light on the dashboard is illuminated, it
indicates a more serious issue. The ECU (Engine Control Unit)
monitors voltage signals to various parts, including the
compressor. Malfunctioning signals can result in incorrect voltage
delivery, triggering the check engine light.
Please note that these are general explanations and specific
diagnoses or repairs should be carried out by a qualified
professional.
4 steps to diagnose a car air conditioning compressor problem:
Step 1: Start the engine and turn on the A/C to the highest
setting. This will activate the air conditioning compressor, which
will draw refrigerant from the evaporator at low pressure, compress
it, and send it to the condenser at high temperature and pressure.
Step 2: Listen for any unusual noises. Inspect the clamps, fixing
points, hoses, and lines for breaks, cracks, missing nuts or bolts,
and vibrations transmitted from the engine to the cabin. Check the
belt, clamping device, tensioner pulleys, and clutch for wear, as
they can cause unusual noises. If no obvious issues are found,
consult a qualified technician to further diagnose the problem.
Step 3: Check for cool air coming from the air vents. Make sure the
cooling fans operate when the air conditioner is on. Clean or
replace the cabin air filter if necessary. Remove any debris, such
as leaves, bugs, or dirt, that could obstruct airflow through the
condenser.
Step 4: Inspect for visible leaks under the car. Look for any signs
of refrigerant leakage, such as oily stains or puddles. If a leak
is detected, it is recommended to seek professional assistance to
properly diagnose and repair the issue.
